How to Install the Portable Dual-Screen Support

Installing your Portable Dual-Screen Support is quick and does not require any tools.
Follow the steps below to set it up safely and correctly:

Step 1 – Unfold the Frame

  • Remove the support from the box.

  • Gently unfold the two side panels until they open at the desired angle.

  • Ensure that the central hinge moves smoothly without forcing it.

Step 2 – Position on Your Laptop

  • Place your laptop on a flat surface.

  • Align the support with the back of your laptop screen.

  • Use the adjustable clips to secure the frame onto the edges of your laptop.

  • The design is compatible with most laptops between 11″ and 18″.

Step 3 – Adjust the Angle

  • Once the frame is attached, open each side panel to the preferred viewing angle.

  • The flexible hinge allows both symmetrical and asymmetrical positioning depending on your workspace.

Step 4 – Connect External Screens (Optional)

  • If you are using external displays, connect them to your laptop using your own USB-C or HDMI cables.

  • The support itself is non-electronic and does not provide video signal; it only holds the screens in place.

Step 5 – Secure and Use

  • Make sure all panels are stable before adjusting your laptop lid.

  • Once secured, you can begin working with your dual-screen setup.

Step 6 – Folding and Storage

  • To remove, gently detach the clips from your laptop edges.

  • Fold the two side panels inward.

  • Store the support in your laptop bag or backpack for transport.

Maintenance Tips

  • Clean with a soft, dry cloth.

  • Avoid using liquids or abrasive cleaners.

  • Store in a dry, cool environment when not in use.